The Gable A-Frame shed is our base model and is built to the same high quality and material standards of our other buildings. The Gable A-Frame style sheds have a low 5/12 A roof pitch, minimal overhangs, 76″ sidewalls, all siding options available.

Gable A Frame sheds 8’ x 8’ and smaller come standard with a 4’ double door and (1) window. 8’ x 10’ sheds and larger come standard with a 5’ double door and (2) windows.

The Extended Gable shed is our most popular shed model. It comes with 6″ taller walls, steeper 7/12 roof pitch, 6″ overhangs on rakes and eaves and wider gable and fascia trim. This is a very classy looking building that will compliment any home.

Extended Gable sheds 8’ x 8’ and smaller come standard with a 4’ double door and (1) window. 8’ x 10’ sheds and larger come standard with a 5’ double door and (2) windows.

Our Gambrel model is very similar to our standard Gable A-Frame, except with a Gambrel roof. The Gambrel roof is very much a “barn style” which provides some additional overhead space and the barn aesthetics. The Gambrel style has minimal overhangs on rakes and eaves and the arrangement of doors and windows is free.

Gambrel sheds 8’ x 8’ and smaller come standard with a 4’ double door and (1) window. 8’ x 10’ sheds and larger come standard with a 5’ double door and (2) windows.

Our Quaker shed model has a unique design where the front wall is about 12″ higher than the rear wall, which gives the roof a bit of an offset. It also has an 18″ overhang on the front with small overhangs on the other three sides. Quaker comes with all siding options.

Quaker sheds 8’ x 8’ and smaller come standard with a 4’ double door and (1) window. 8’ x 10’ sheds and larger come standard with a 5’ double door and (2) windows.

Our two standard 2-Story models include the 2-Story Extended Gable and the 2-Story Extended Gambrel, which are completely customizable. These buildings come with a full second floor, which can be accessed by L-shape, straight, or pull down stairs. These buildings come standard with a 12/12 roof pitch, 93″ wall height (7’6″ studs), 6″ overhangs on the rakes and eaves with 5.5″ fascia and gable trim. Because the 2-Story buildings have a full second floor, this makes them too tall to haul down the road completely assembled. However, If we have enough clearance (roughly 2′ wider than the width of the shed) then we can deliver the bottom portion of the shed whole with our 1-ton truck and flatbed trailer that is specifically designed to deliver sheds! Then we will either stick build or use a boom truck/ crane to set the roof/ second floor on and secure the two pieces together!